Garage drywall cost starts from $1,200 per garage with Cavender Drywall. The final number depends on things you can see from the driveway. How big is the garage, and is the ceiling already boarded? Is there a shared house wall or living space above? How finished do you want it? Enclosed lanais are priced separately, because moisture changes the work.
We work across Lake and Orange counties, plus Altamonte Springs in Seminole County and Wildwood in Sumter County. A lanai gets priced on its own layout, because moisture and the wall behind the board change the job. Below is what moves the price and what a fair quote should spell out.
What does the $1,200 starting price actually cover?
The starting price covers boarding an unfinished garage and taping and finishing it. The finish is either texture or a clean, simple surface, depending on the space. Texture to match the house makes sense where the garage adjoins finished space. A garage that is purely a garage can stay clean and simple. The size, the ceiling and the finish you choose all move the final number. We take dust seriously and scale the dust control to the size of the job.
Plenty of homes here were handed over with the studs bare, or with the ceiling boarded and the walls left open. Finishing the garage is one of the simpler ways to make it more usable. It cleans up the look, cuts down on dust once the gaps are taped, and gives you a finished surface for shelving anchored into the studs.
"From" means the lowest end for a straightforward job. We do not publish a price for a two-car garage with a vaulted ceiling and three doorways, because that number depends on the space. Text photos and the approximate dimensions, and we reply with a figure for your garage.
What moves the price up or down?
| Factor | Effect on price | Why |
|---|---|---|
| Garage size | Larger costs more | More board, more joints to tape and sand |
| Ceiling already boarded or not | Unboarded costs more | Overhead board is slower to hang and finish than wall board |
| Fire separation | Adds cost | The house wall generally needs at least half-inch board, and a ceiling under living space needs 5/8" type X, with joints taped and finished |
| Finish level | Textured to match costs more than clean and simple | More coats, more skill |
| Texture matching | Adds cost where it joins finished space | Matching knockdown or orange peel is careful, skilled work |
| Obstacles | Raises labor | Working around wiring, plumbing, the water heater, storage, steps and tight corners |
| Moisture-resistant board | Slightly higher board cost | Used on lanai and high-humidity walls where it makes sense |
| Access and clearing | Can add time | Full garages slow everything |
We ask about these things when you text photos, so the figure we send is based on what we can see. If what we find on site changes the price, we tell you before any work starts.
Why does fire-rated board matter for the price?
The wall between the garage and the house is a fire separation assembly, and so is the ceiling under living space. Code generally requires at least half-inch board on the garage side of the shared house wall. It requires 5/8" type X board on a garage ceiling with rooms above it. The separation should be continuous, with the joints taped and finished, not just screwed up and left. Type X board is usually a little pricier and heavier than standard board. Your local building department has the final say on what applies to your home.
Cheap bids tend to skip this line item. Getting it wrong surfaces at resale, on an inspection report, at the worst moment. If a quote does not say what board goes on the house wall and the ceiling, ask. The answer tells you a lot about the contractor.
How is a lanai priced differently?
Enclosed lanais are the other common job here. Depending on how the lanai was enclosed and whether it is air-conditioned, those walls can stay humid. Standard board on an exterior-facing lanai wall can be asking for trouble. We use moisture-resistant board where it makes sense. If we see signs the enclosure is trapping moisture, we point them out before boarding over it.
That honesty can change the price. If the wall behind the board is not set up right, painting over it does not fix it. A lanai with a moisture problem can show it in the board over time. Where we spot a problem, we would rather tell you before we hang anything than quote standard board and let you find out later. The cost depends on the wall area, what is already in place, and whether anything behind the board needs another trade first.
What should a fair garage drywall quote include?
A fair quote lists these things in plain words:
- The board type for each surface, including what goes on the shared house wall and any ceiling under living space.
- How many coats of compound, and the finish level.
- Whether texture is included, and how it will match if the garage adjoins finished space.
- What dust control is used. On bigger or dustier garages, ours is plastic sheeting and a HEPA vacuum clean-up. On a small job it is usually drop cloths and a careful clean-up before we leave. Either way, it should be more than a bedsheet over the doorway.
- What is not included, such as painting, electrical work, or moving stored items.
- A timeline. The timeline depends on the size of the garage, the ceiling and the finish. Anything involving three coats of mud runs across two visits, because the mud has to dry between coats. We give you an expected timeline with your quote.
If a bid is a single number with no scope, you cannot compare it to another bid.
Is a very cheap quote a warning sign?
Often. A low number can mean one of three things:
- Standard board where fire-rated board is needed.
- Joints left unfinished or with too few coats.
- A job quoted on paper that will grow once the contractor is on site.
None of those saves you money. They move the cost to a later date, often to a home inspection. The most common failures and what they cost to fix are in the most common garage and lanai drywall mistakes.
Is it worth doing at all?
Sometimes not. Skip it if the garage is a pure workshop that you are about to gut. Skip it too if you are selling next month "as is" and the garage is not a factor. If you are keeping the house and use the garage for storage, a workshop or a car, finishing it pays back. You get a cleaner, more usable space, and an inspector will not flag bare studs.
Can I save money by preparing the space?
Yes. Clear the walls and move stored items to the middle of the garage or out of it. Tell us about anything on the walls that must stay. A garage that is empty and easy to get around takes less time. How to prepare your home for garage and lanai drywall lists exactly what to move.
What happens when I text for a quote?
Send photos of each wall and the ceiling, plus rough dimensions. Tell us whether the garage adjoins finished space. We reply with a price from the photos, so you are not waiting around for a two-hour appointment window. If we think something needs a look in person, such as a possible lanai moisture problem, we say so.
Text (352) 561-3616 with photos and you get a price before anything is booked. You can also see the garage and lanai drywall service page for how the job runs.
Quick answers
How much does it cost to drywall a garage in central Florida?
Our garage drywall starts from $1,200 per garage. The final number depends on the size of the garage, whether the ceiling is already boarded, whether there is a shared house wall or living space above, and what finish you want.
Is drywalling a lanai more expensive than a garage?
It can be. Depending on how the lanai was enclosed and whether it is air-conditioned, lanai walls can stay humid, so we use moisture-resistant board where it makes sense. The price depends on the layout and what is already in place.
Why do two garage drywall quotes differ so much?
Often because one includes taped and finished joints and fire-rated board where the code needs it, and the other only hangs sheets. Ask each contractor to list board type, number of coats and finish level.