Drywall repair on an older Central Florida home usually runs $370 to $605 for a single hole or crack. The price depends on size, ceiling height and how much texture matching is involved. Cavender Drywall patches the damage flush in thin coats and matches the knockdown or orange peel so the repair blends into the wall around it.
Drywall repair means cutting out damaged board, backing it where needed, patching it flush, taping and coating it in thin layers, and texturing it to match the surrounding wall. On an older house the hard part is the matching. The finish has been painted over for years, on a wall that has been moving a little the whole time. A small hole of about 4 inches or less is usually around $370. Text a photo to (352) 561-3616 and you get a price before anything is booked.
Cavender Drywall is based in Minneola. We work across Lake County and much of Orange County, including Clermont, Groveland, Mount Dora, Eustis, Winter Garden and Ocoee.
Why does drywall crack in older Central Florida homes?
Mostly movement. Houses of any age shift a little with moisture and heat, and older ones have had more years of it. Most homes here sit on a concrete slab, and many older ones have concrete block outer walls with drywall inside. When the slab and walls move, the drywall doesn't flex. The stress shows up at the weak points, which are the corners of doors and windows, and that's where most cracks start. Over the years moisture can also loosen the tape at seams. Earlier patches that were rushed or built up in one thick coat tend to crack again.
Then there's the weather. Summer rains and hurricane season (June through November) bring roof and window leaks. A wall that got wet behind the paint is a poor base for a patch until it has dried out. The leak itself is a job for a licensed roofer or plumber, not a drywall crew. Get the source fixed, let the wall dry, then patch.
Texture is the other local factor. Most walls in the homes we see are knockdown or orange peel, and that gets its own section below.
Is the crack cosmetic, or a sign of something bigger?
A hairline crack running off the corner of a door or window is usually cosmetic. The house moved a little, the drywall didn't, and the tape or the mud under it cracked. That's a normal patch-and-texture job.
Two things change that. If a crack keeps widening after you first notice it, or doors start sticking in their frames, have a structural engineer look before anyone patches it. Patching over a crack that's still moving just hides it until it opens again. If we see signs of that in your photo, we'd rather tell you than sell you a patch.
An easy way to check is to make a pencil mark at each end of the crack, write the date next to it, and look again in a few weeks.
The four repairs we see most: holes, corner cracks, failed patches and cutouts
Most drywall calls on older homes here are one of four things, and our drywall repair service covers all four.
Doorknob and furniture strikes leave clean, sharp-edged holes in the face of the wall. They're usually a few inches across and often 4 inches or less. If you're searching for how to fix a hole in the wall, this is probably it. These are the simplest repairs. The board around the damage is usually solid, the backing is straightforward, and the job is often one visit.
Corner cracks start at the corners of windows and doors and run anywhere from several inches to a couple of feet. Either the tape fails or the compound under it cracks. The crack often runs deeper than it looks, so it has to be opened up, taped and coated properly rather than skimmed over.
Failed patches are repairs someone else did. You can usually tell straight away: fuzzy edges, shrinkage lines, peeling tape, soft and chalky compound, or no texture at all. The fix is to cut the failed patch out back to sound board and start over.
Plumbing and electrical cutouts are openings left after a licensed plumber or electrician has finished their work. They are often larger than a standard hole and need proper backing before the patch goes in. We only do the drywall. The wiring or plumbing stays with the licensed trade, and we close the wall back up once they're done.
Any of the four blends in once the texture is matched. If it isn't, you'll see it in side light.
How do you match knockdown and orange peel texture on a repair?
The patch is textured with the same pattern as the surrounding wall, knockdown or orange peel, and feathered out past its edge so the outline doesn't show. Knockdown is sprayed or splattered on, then flattened with a knife. Orange peel is sprayed in a fine dimpled pattern. On a small hole, that often means texture work well beyond the patch itself, and a larger repair needs more.
Skip that step and the patch shows. A patch that's sanded smooth, primed and painted in a knockdown wall still catches the side light, and paint doesn't hide it.
On holes we cut back to sound board and add backing so the patch has something solid behind it. Cracks and small dings get the prep the damage calls for. We build the patch in thin coats, then match the knockdown or orange peel and feather it past the edge. Matching texture is the step we put the most care into, because it decides whether the patch shows. When you're getting quotes, ask any contractor how they plan to match the texture.
Popcorn ceilings are the exception, and plenty of older homes have them. Patching popcorn almost never blends. On a popcorn ceiling we'll usually recommend removing and retexturing the whole ceiling rather than selling you a patch you can still see. Removal with the skim coat and retexture usually runs about $3.15 to $3.60 per square foot, and a photo of the ceiling gets you a price.
Does an older popcorn ceiling have asbestos?
If the house was built before 1987 it may, and the only way to know is a lab test on a sample, about $50 to $100. That test is a separate cost from the removal. We will not scrape an untested pre-1987 ceiling. If it tests positive, the work belongs with a licensed asbestos abatement contractor.
How much does drywall repair cost in Central Florida?
Most single-hole or single-crack repairs run $370 to $605, and a small hole of about 4 inches or less is usually around $370. Where a repair lands depends on size, ceiling height and how much texture matching is involved. You get a price from a photo before we book anything. If what we find on site changes it, we tell you before any work starts.
| Repair Type | Typical Size | Typical Cost | Visits |
|---|---|---|---|
| Doorknob and furniture strikes | About 4 inches or less | Usually around $370 | Often one |
| Failed previous patch | Depends on the old patch | Usually $370 to $605 | One or two, depending on coats needed |
| Corner crack | Several inches to a couple of feet | Usually $370 to $605 | One or two, depending on coats needed |
| Plumbing or electrical cutout | Varies; often larger than a standard hole | Quoted from photos; confirmed before work starts | One or two, depending on coats needed |
The bigger the area we have to open up, the higher the price. That happens if the original tape has failed, the board is soft from old moisture, or there's earlier damage underneath. A bigger area means more backing, more compound and more texture. If the wall is solid and only the immediate damage needs work, you're at the lower end. For a fuller breakdown, see How Much Does Drywall Repair Cost in Central Florida? (2026 Prices).
Why bigger repairs take two visits (and why rushing fails them)
A small repair, like a doorknob hole or a minor ding in solid drywall, is often one visit. It gets prepped (cut back and backed if it's a hole), coated in thin layers, then textured to match.
Anything that needs three coats of mud to get flush runs across two visits, and that tends to be the bigger repairs. Joint compound has to dry properly between coats, and Central Florida's humid summers slow that drying down. If the next coat goes on mud that isn't dry, the mud shrinks as it cures and leaves seams and dips that show through paint. One thick pass shrinks even worse than thin coats, and that's how the outline of a patch shows up months later.
On a two-visit job, the first visit usually covers the backing and the first coats. The second visit follows once the mud has dried and covers the final coat, sanding and texture. We give you an expected timeline with your quote and agree dates with you after that.
Dust control in older homes
Drywall repair makes dust from cutting and sanding, and old walls add their own. It gets into closets and settles on shelves and picture frames, and a bedsheet over the doorway won't stop it.
We take dust seriously. Bigger and dustier jobs, the ones with a lot of cutting or sanding, get plastic sheeting and HEPA vacuum clean-up. On a small patch it is usually drop cloths and a careful clean-up before we leave. Either way, the aim is to keep dust out of the rest of the house. How to Prepare Your Home for Drywall Repair covers what to move out of the way beforehand.
DIY drywall patch or hire it out?
DIY is reasonable if the damage is a single doorknob hole in solid drywall, you've patched drywall before, and you can match the texture. Plan on at least a couple of days with drying time between coats, and longer in a humid summer. If that's not how you want to spend a weekend, a photo gets you a price.
It's worth hiring it out in a few cases:
- The damage is at a corner.
- The wall around it is soft or damp.
- The tape has failed.
- There's older damage underneath.
- There's knockdown or orange peel to match.
Corners and texture are the hard parts. A wet wall needs the source found and fixed first. If that's a pipe, a plumber has to fix it before any drywall goes back. A failed DIY patch usually has to be cut out and redone, which adds to the bill.
How soon you need it done depends on the damage. A crack next to a leak or a wall that stays damp shouldn't wait. A stable hairline crack, or a ding at the back of a closet, can wait until you next paint. If you're about to paint a room or list the house, fix cracks and old patches first, because buyers and inspectors tend to notice them.
Get a drywall repair price from a photo
Text Cavender Drywall a photo of the damage and your address at (352) 561-3616. Send one close-up and one wider shot that shows the wall texture, plus a rough size if you can. A hand or tape measure in the photo helps. We reply with a price before anything is booked, so there's no two-hour appointment window to wait around for, and then we agree a date with you. If a patch shows through the paint within 30 days, we come back and touch it up. The limits are in our Terms.
Quick answers
Why does my drywall crack in older Central Florida homes?
Houses shift with moisture and heat, and the stress concentrates at the corners of doors and windows, so hairline cracks there are common. If a crack keeps widening or doors stick, have a structural engineer look at it before anyone patches it.
How much does drywall repair cost on an older Central Florida home?
Most single-hole or single-crack repairs run $370 to $605, depending on size, ceiling height and texture matching. A hole of about 4 inches or less is usually around $370. At Cavender Drywall we quote from a photo before anything is booked.
How do you match knockdown texture on a drywall repair?
At Cavender Drywall we match the texture to the surrounding wall, knockdown or orange peel, and feather it out past the patch so it blends in. Popcorn ceilings are the exception. Patching popcorn almost never blends, so we usually recommend removing and retexturing the whole ceiling.
Will the repaired spot show after drywall repair?
Usually not, if the texture is matched and feathered out past the patch. A patch with smooth or unmatched texture will show in side light, even under good paint. At Cavender Drywall, if a patch shows through the paint within 30 days, we come back and touch it up. The limits are in our Terms.